Connectivity

Connecting A Thunder Laser To LightBurn Via USB
Here is how to connect your thunder laser to the computer via usb: WINDOWS USERS: If you do not have the FTDI driver installed as mentioned you ...
Thu, Jul 22, 2021 at 11:29 PM
Connecting A Thunder Laser To LightBurn Via Ethernet
*If your WIFI internet IP is of the range 192.168.1.xxx, it is advised to change your machine to 192.168.x.100 and then manually assign your computer's...
Wed, Sep 22, 2021 at 7:33 PM
Adding Wireless Capability To Thunder Laser DSPs
THE INFORMATION BELOW IS LEGACY INFORMATION AND FOR REFERENCE ONLY! PLEASE SEE THE LIGHTBURN BRIDGE FOR THE MOST STABLE WIRELESS SOLUTION! ...
Thu, Oct 14, 2021 at 5:12 PM
ThunderCAM Installation Manual
NOTE: its a good idea to tape it up first and view it before you stick it down. The mounts are 3d printed and the adhesive is strong. Removal would likely b...
Tue, Oct 5, 2021 at 3:33 PM