Control Software

RDWorksV8.0 Software Manual
RDWorksV8.0 Software Manual below:
Fri, Mar 5, 2021 at 10:36 AM
LightBurn Trial Mock Nova Setup
This will walk you through a mock device setup so you can emulate a Thunder Laser in your LightBurn trial. When installing LightBurn for the first time be s...
Thu, Sep 2, 2021 at 10:32 AM
Installing The LightBurn CorelDRAW Macro
Installing the LightBurn macro for CorelDraw. This documentation can be found in the HELP tab inside LightBurn. The lightburn color palette is attac...
Tue, May 18, 2021 at 10:27 AM
C++ Install Error When Updating LightBurn
Thu, Jul 30, 2020 at 11:26 AM
Imperial & Metric Units in LightBurn
Tue, Aug 4, 2020 at 7:28 PM
Is It Hard To Run A Thunder Laser?
We have been getting this question quite often, especially from those coming from epilog, glowforge, and others. So we thought we would demonstrate how easy...
Sun, Dec 13, 2020 at 10:23 AM
ThunderCAM Preset Lens Correction in LightBurn
THE CAM FIELD OF VIEW HAS CHANGED. USE THE 85 or 120 FOR CURRENT LB CAMS: 85 and 120 FOV LB Cam Lens Correction Values
Wed, Sep 22, 2021 at 3:40 PM
Simplified ThunderCAM Calibration & Alignment Procedure
This is a recording of a remote session for support ticket 1068. This is a lens calibration and alignment procedure on a Nova 51 & ThunderCAM kit with a...
Mon, Sep 13, 2021 at 12:03 PM
Roll Back/Restore LightBurn Prefs
more info: https://forum.lightburnsoftware.com/t/where-is-my-original-prefs-helppppp/9978 https://forum.lightburnsoftware.com/t/new-version-and-pr...
Wed, Feb 10, 2021 at 11:31 PM
The Difference Between Control Software and Design Software
Control Software Control Software is specific to certain laser controllers and DSP's and is primarily used to control the laser. Some control software...
Sun, Feb 14, 2021 at 9:20 PM